Extensive range of end-suction pumps available to suit requirements for fully hydraulically calculated systems giving a wider range to suit individual selection requirements.

Increased Precision - EBW Detonators increase the precision of initiation as compared to bridge wireTank: Fuel tank made from epoxy painted steel with a strong support structure. Fully equipped with a fuel gauge, drain plugs and air vent valves. The primary application for this instrument is to supply a timing pulse upon detection of a flash. It has been used with a wide array of flash-producing items, including the following: Small arms, from pistols through small-bore rifles, minigun, and heavier caliber machine guns. Larger caliber tank guns and cannons. Various sizes of mortars. Shoulder-launched weapons. Explosives and flash-bang grenades.

All components within the pumps are independently approved and tested ensuring the product meets the expected high quality. The purpose of the FS-43 Firing Module is to provide a significant amount of flexibility to this EBW detonator firing system. Since the firing pulse to function the EBW detonator must be applied at the proper rate of rise, or frequency, the firing module must be placed relatively close to the detonator. By being able to separate the Firing Module from the control unit, the operator can perform the detonation at extended distances as required by the size and characteristics of the main explosive charge.

stray DC voltages from -600VDC to +150VDC, AC voltages at 600V rms from 40Hz through 20kHz, RF testing BSEN12845 – Fixed firefighting systems, automatic firefighting systems, design, installation and maintenance